EMT Customized High Pressure Retrieval Tools！
EMT Customized High Pressure Retrieval Tools！
Quantity required by customer :1 sets
Destination: Indonesia
1. Introduction of Removal Tool
Removal Tool usually works with Corrosion coupons. Corrosion coupons are necessary equipment to detect or evaluate the corrosion status of the pipeline system. It can accurately display the corrosion situation inside the pipeline system and assist in the maintenance of the pipeline.
At present, the corrosion coupons used at home and abroad can meet the requirements for detecting the corrosion status of pipelines. But most of them require pipeline pressure relief to stop production, resulting in large economic losses.
Based on the above reasons, our company has developed a pressure removal tool that can remove the corrosion coupon under pressure without the need for pipeline pressure relief and shutdown. Its main components are made of stainless steel, which is resistant to acid and alkali and corrosion. The demolition tool with pressure belongs to the form of mechanical contact, and the action is sensitive and reliable.
This manual is helpful for your installation, use, and proper maintenance of the demolition tool under pressure, so please read the manual carefully before installing and using this product.
2. Technical characteristics
Applicable pressure range: P≤45Mpa;
The applicable temperature range: -20~100℃;
Applicable medium: petroleum products, natural gas, and other non-corrosive fluids.
The installation height of the equipment under normal use conditions depends on the pipe diameter (generally not more than 1.5 meters);
3. Equipment structure
Hammer Nut—connecting the base and the gear plate valve (Service Valve) (PTFE coating)
Service Valve—connecting the lifting component (Retriever), which is used to adjust the internal pressure of the dismantling tool under pressure (PTFE coating);
Bleed Valve — used to release the internal pressure of the demolition tool under pressure (stainless steel)
Bypass Valve — used to balance the internal pressure of the dismantling tool under pressure (stainless steel)
Adapter — used to connect corrosion coupons and lifting components (Retriever) (stainless steel)
Plug Drive—The drive assembly (stainless steel) used to remove and install the corrosion coupon
Plug Lifter—For the linkage of inner and outer magnetic steel components (strong magnetic steel)
Stop Block — used for fixing the outer magnetic steel component (Plug Lifter) (stainless steel)
Retriever—connecting gear plate valve for lifting and installation of corrosion coupons (stainless steel);
