Intrusive Mechanical Pig Detector Pipeline!
Quantity required by customer :20sets
Destination: Brazil
Pig Detector Installation method
1. Before installation, check that the mechanical body of the indicator and the display mechanism are flexible and reliable. The operator disassembles the main body of the machine according to the structure and installation diagram. Then weld the base and pipeline separately.
2. Welding base:
a. No-pressure installation: clean up the installation site. Remove all attachments. Reveal the true color of the metal. Straighten the base (welding orientation). Make the slotting direction at the upper end of the base parallel to the centerline of the pipeline or the mark on the upper end of the base at the centerline of the pipeline. (The slotting direction or sign of the base is consistent with the movement direction of the trigger). Compress the base to prevent shifting or deflection during welding.
b. Installation under pressure: (refer to the operating instructions of the drilling machine).
Note: When welding the base on the pipeline, the pressure P in the pipeline should be limited.
c. After the main body of the machine is welded and installed, install the main body of the machine in sequence according to the structure and installation diagram. Connect the display mechanism with fastening screws according to the structure and installation diagram. And the direction of the display mechanism can be adjusted for easy observation.
